Mini Jet Kits
 The most versatile accessory for for any high pressure jetting unit. The US Jetting Mini Jet Kit with a 3 Rear, 1 Forward Ball Jet delivers water up to 4,000 PSI within the smallest of pipe diameters through a ¼" inside diameter flexible hose. Mini Jet Kits are designed for use in pipes with diameters from 3 to 6 inches with multiple bends. Mini-Jet Kits can also be used for cleaning straight lengths of pipe with diamters of 1½ inches.
Mini-Jet Hose Kits are available in 100', 150', 200', 250', and 300' lengths with a 3 Rear, 1 Forward Ball Jet. Mini-Jet Kits include a 1/2" NPT female swivel connector for fast & easy connection to the main high pressure jetting hose. A unique feature of US Jetting Mini Jet Kits is the ability to reverse the hose connection end and the nozzle (ball jet) end. This allows for increased pipe cleaning effectiveness for cleaning branch lines attached to a main building drain. This method of line stringing is also useful for pulling or threading the larger ½" hose into normally inaccesible places. Male NPT threaded ends allows for the coupling of two Mini Jet hoses together (with a double female coupler) for non-typical longer pipe lengths.
Mini-Jet Hose Kits can be used with an array of US Jetting spinning nozzles or chain flails for more agressive small diameter pipe cleaning applications.
US Jetting Mini Jet Kits can be used with most brands of high pressure jetting units. Call the US Jetting Parts Department for details about use of Mini Jet Kits with high pressure jetting units from other manufacturers.
A quarter shows the relative size of the ball jet nozzle on Mini Jet Kits. Rounded nozzle surface allows for easy
turns at bends & elbows. Lightweight Mini Jet Hose is very flexibleand easily passes through tight pipe bends and
elbows.
Flexible US Jetting Mini Jet Hose is rated at 4,000 maximum working pressure with a 2.5 minimum burst rating.
Mini-Jet Kits are a popular option on new US Jetting units, Mini Jet Kits ordered with Carry Reel are installed with
base mount holder for secure transport with the US Jetting unit. A single lever release allows for easy detachment
from the unit. The Carry Reel is connected to the main high pressure jetting hose by a hgih pressure swivel attached
to the center of the Carry Reel.
 
US Jetting offers a Drop Head Nozzle for use Micro-Mini Jet & Mini Jet Kits. Three flexible weight balls help to steer nozzle in a downward direction at vertical connections. Drop Head Nozzles are fabricated from stainless steel to prevent rust and corrosion.
| 
