High Pressure Jetting Hose

High Pressure Jetting Hose is a wear item that requires occasional replacement. It has always been impossible to predict or define the lifespan of high pressure sewer jetting hose due to numerous field conditions encountered and operator negligence. Most damage to high pressure jetting hose result from the non-use of Tiger Tail Hose Guides that will result in hose ruptures. Hose due to damage or multiple hose punctures is costly, not only for the replacement of the high pressure jetting hose but the loss of productivity and revenue.

US Jetting maintains a wide range of high pressure jetting hose in inventory for immediate same day shipping. Inventory includes 1/2", 5/8", 3/4" and 1" hose diameters with lengths of 250', 500' & 600' feet.



1/2", 3/4" & 1" High Pressure Sewer Jetting Hose - Same Day Shipping Available.

All US Jetting High Pressure Jetting Hose is designed and manufactured to provide long working life and maximum safety. All US Jetting high pressure jetting have a minimum burst rating of 2½ time the rated working pressure of the hose. The standard US Jetting ½ diameter high pressure hose has a working pressure of 4,000 PSI with a minimum burst rating of 16,000 PSI.

All US Jetting hose is constructed with a thermoplastic inner core tube. The inner core tube is wrapped with a woven multi layer textile mesh reinforcement to reduce core expansion, prevent rupture and to provide flexibility. A second, thinner layer of woven textile material is then installed for the outer thermoplastic coating to bond to. The two textile layers are not bonded together, this allows the high pressure hose to expand and contract. Wire braid or mesh is not used to manufacture high pressure jetting hose (unlike high pressure hydraulic hose) to reduce hose weight per foot.



3/4" & 1" Hose with 3,000 PSI Working Pressure
Available in 500' & 600' Lengths

Part of the US Jetting High Pressure Jetting Hose Inventory

Typical Hose Abrasion Damage

Hose abrasion is the cause of premature hose failure.

Blue 1" High Pressure Jetting Hose - 500' & 600' Lengths

Micro Mini - Jet & Mini Jet Hose Kits

The below chart is used to calculate the pressure loss through different hose diameter sizes. Pressure loss is critical for sizing nozzles to the correct working pressure & maximum jetting unit efficiencincy. Confirmation of these chart calculations can be done by an easy test, this test works for any high pressure jetting unit. Operate the jetting unit without a nozzle attached to the end of the jetting at maximum engine RPM. The hose pressure loss will be displayed on the pressure gauge.