US Jetting Run-Dry Pumps
US Jetting 4018 - 4,000 PSI @ 18 GPM
US Jetting 4025 - 4,000 PSI @ 25 GPM
US Jetting 4018 - 4,000 PSI @ 18 GPM Pump
Long experienced with the development and use of high pressure jetting units, US Jetting has developed a series of plunger style pumps capable of generating pressures to 4,000 PSI with the ability of running dry of water without sustaining pump damage. Unlike the radial piston diaphragm pumps (RPD Pump series), US Jetting series of Run Dry pumps now offer greater water flow output with lower maintenance costs and fewer moving parts for easier maintenance. US Jetting continues to lead the trend to produce High Pressure - Low Flow pumps for all types of applications within the high pressure jetting market. As always, all US Jetting high pressure pumps are coupled to efficient air cooled diesel engines with horsepower and torque output selected for individual pump requirements; reliable engine power to match US Jetting pump reliability. Electric powered US Jetting Pumps are available for specialized industrial and manufacturing applications.
The US Jetting 4018 pump provides water at 4,000 PSI at 18 gallons per minute. A US Jetting proprietary design stainless steel fluidhead is the key component to the relaibility and durability of the pump. This pressure and flow amount produced is close to the maximum pressure - flow capacity of half-inch high pressure lightweight jetting hose. This pump - pressure - water flow - hose capacity relationship virtually defines the maximum efficiency for a high pressure sewer jetting unit for use in residential, commercial, industrial and municipal markets.
Pictured above is the US Jetting 4018 pump powered by a Hatz 3-Cylinder Silent Pack diesel engine mounted on a single
axle trailer with a 300 gallon water tank (300 Gallon Platform Series). This is US Jetting's most popular selling unit.
US Jetting 4018 high pressure jetting units equipped with half-inch high pressure jetting hose are the most popular choice with sewer and drain cleaning contractors. Half-inch high pressure hose easily negotiates 4" pipes with bends commonly found in residences and commercial buildings. With water output flow of 18 GPM (near maximum pressure / flow capacity for half inch hose), these units can effectively clean pipes up to 12" diameters. US Jetting can produce these units in multiple versions to suit customer requirements. US Jetting 4018 units mounted upon a single axle trailer with a 300 gallon water storage tank is the most popular unit manufacture by US Jetting. These standard production units can be found in operation wtith the 5 largest national sewer & drain cleaning franchise in the US. US Jetting units can also be manufactured in a 600 gallon tandem trailer, skid units with or without a water tank, open truck units, enclosed truck units and enclosed trailers.
Above photos of standard production US Jetting High Pressure Jetting units used within the sewer and drain cleaning
industry. All units include self contained Anti-Freeze System, seven position swivel hose reel & Jump Jet Pulsation System.
Please refer to download page for Abobe PDF files for more information & available options.
Above and below photos of custom manufactured US Jetting High Pressure Jetting Units. US Jetting 4018 Pump can be configured
with various water storage tank capacities. Installation within enclosed trucks or trailers for cold weather applications or for
maximum enclosed (protected) storage. US Jetting can design & manufactue units to specific customer needs. Skid units
are manufactured and shipped to customer for final installation.
US Jetting 4025 - 4,000 PSI @ 25 GPM Pump
For users or applications that require additional water flow at 4,000 PSI, US Jetting manufactures the USJ 4025 pump. The US Jetting 4025 pump provides water at 4,000 PSI at 25 gallons per minute. This pressure and greater water flow amount produced by this US Jetting pump is close to the maximum pressure - flow capacity of 5/8-inch high pressure hose. Again, this pump - pressure - water flow - hose capacity relationship is maximized to the high pressure jetting hose capacity limit. Unique proprietary design stainless steel fluidhead is the key component to the relaibility and durability to this higher water flow output pump.
Close-up pictures of the US Jetting 4025 Pump. Stainless steel fluid end separates with 8 hex bolts for easy servicing
when needed. Pump mounting allows for easy service checks and maintenance.
US Jetting 4025 high pressure jetting units equipped with 5/8-inch high pressure jetting hose are the most popular choice with municpalities and contractors working with larger diameter pipes. With the extra pressurised water flow, these units are effective in cleaning both sanitary and storm lines from 6 to 24" diameters. Using weighted nozzles, US Jetting 4025 units clean easily clean storm sewers & outfalls with heavy dirt and debris deposits. US Jetting 4025 can be mounted on 300 and 600 gallon trailers for easy mobility. US Jetting 4025 units can also be custom mounted on truck chasis with 300 or 600 gallon water storage tanks while still maintaining a gross vehicle weight under 26,000 GVW (no CDL license required). With water consumption of 25 gallons per minute, US Jetting 4025 units can have working times up to 24 minutes between tank refills with a 600 gallon water tank. An opional dual hydraulic hose reel with 500 feet of half-inch hose (4,000 PSI at 18 GPM) can be factory installed for use in smaller diameter pipes (at a reduced maximum water flow of 18 GPM).
Just a few samples of the US Jetting 4025 pump configurations (all with 600 gallon water tanks) available. Not shown is enclosed
trailer, skid, open single axle trailer or the dual reel option. Self contained Anti-Freeze Systems are available for all units
with enclosed units available with heating systems. Please refer to download page for Abobe PDF files for more
information & available options.
| 
