Vac Pumps

US Jetting Vac Pumps are designed to use high pressure water to pump liquid, slurry or debris. Vac Pumps contain no moving parts, only moving water. Vac Pumps have a 2 inch diameter intake and contain 20 feet of discharge hose.

When connected to a high pressure jetting hose, four streams of pressurized water shoot in a combined stream away from the pump intake. The high veloctity of the water streams creates a venturi vacuum, drawing liquids and debris into the pump. Debris that passes through the streams of water typically disintegrates or reduces in size. Thick slurry or sludge thins or liquifies from the addition of water from the jet streams. 

US Jetting Vac Pumps do not require priming to operate,  vacuum begins when the high pressure water is fed to the vac pump.

Vac Pumps are lightweight and portable units. Typical applications are for pumping pits, basins, culverts or manholes to gain access to pipes that contain blockages. Vac Pumps are very useful for cleaning after a pipeline blockage has been removed. Waste sludge material can be cleaned up with the vacuum with the liquified sludge flushed down an open drain for disposal.   

Any liquid, slurry or debris passing through a Vac Pump is subjected to the destructive power of four streams of high pressure water.  Slurry or sludge type material is liquified or thinned with the addition of pressurized water to allow for easier discharge flow. Debris is reduced to smaller pieces or to fine particles (depending on debris material) for easier material transfer.

Evacuating standing water from a clogged storm drain catch basin is quick & easy with a Vac Pump.