Skip to content
FAQ Request Quote Request Service Contact
1/2" Fixed Swage Fitting

1/2" Fixed Swage Fitting

Service Part/Hose
2J-276
$24.84 - $24.84
$24.84
$24.84 - $24.84
$24.84
The 1/2" MENDER SWAGE FITTING mends two portions of hose together. Rated for 4000PSI. The 1/2" FIXED SWAGE FITTING includes male end coupling. The male swivel connects the high pressure hose to the nozzle. Rated for 4000PSI.

FAQ

Can I change the gun mode on my sewer jetter to operate at 4000PSI?

Yes, call your USJ rep and they can walk you through the steps to adjust this setting.

Do I need an unloader valve?

No, because this gun has the dumping feature, it does not require an unloader valve.

Water is coming out of the end of my dump gun even when I pressure down. Is that ok?

Yes, the dumping feature means that when you release the trigger of the gun, instead of dead heading the water pump, the water is relieved at low pressure out of the end of the top barrel on the gun. This protects the pump against over pressurization.

Why does my engine bog down when I use this dump gun?

If your engine is bogging down, you likely need to open your bypass valve to divert some water back to the tank since the gun is only rated for 8GPM.

Copyright © 2026 US Jetting.

Powered by Shopify

AMEX
VISA
MASTERCARD