Skip to content
FAQ Request Quote Request Service Contact
3/4" Warthog SuperSpin III WH sewer jetting nozzle with rotating head, rear propulsion jets, and offset front jet for grease, roots, and sewer cleaning in 6–24 inch pipes. Heavy‑duty controlled‑rotation nozzle with oil‑filled chamber for longer life, used with 3/4" jetting hoses for high‑pressure orbital pipe cleaning.

3/4" Super Spin III WH

Nozzle
2J-349-3
$1,929.00 - $1,929.00
$1,929.00
$1,929.00 - $1,929.00
$1,929.00

3/4" WARTHOG SUPERSPIN III WH is very effective with grease, roots, and sewer cleaning applications in 6"-24" pipes using a 3/4" hose. The nozzles rear jets provide propulsion, while the offset front jet gives a complete orbital clean and blockage penetration. The controlled rotation of the nozzle head allows for maximum non-streak cleaning of pipe wall surfaces. The oil filled internal chamber slows the nozzle head from high speed rotation and lubricates the internal bearings for longer nozzle life. This nozzle requires replenishment of Fast Fluid (2J-349-19) every 50 hours of use. 

Debug Info:

Current Machine In Dropdown:

Collections 'jetters' empty? No (9 products)

Current Variant Information:

Current Variant:

Compatability Status:

Select a jetter machine to check compatibility
Please select a Jetter Machine
The product is compatible with your machine model!

FAQ

Can I change the gun mode on my sewer jetter to operate at 4000PSI?

Yes, call your USJ rep and they can walk you through the steps to adjust this setting.

Do I need an unloader valve?

No, because this gun has the dumping feature, it does not require an unloader valve.

Water is coming out of the end of my dump gun even when I pressure down. Is that ok?

Yes, the dumping feature means that when you release the trigger of the gun, instead of dead heading the water pump, the water is relieved at low pressure out of the end of the top barrel on the gun. This protects the pump against over pressurization.

Why does my engine bog down when I use this dump gun?

If your engine is bogging down, you likely need to open your bypass valve to divert some water back to the tank since the gun is only rated for 8GPM.

Copyright © 2026 US Jetting.

Powered by Shopify

AMEX
VISA
MASTERCARD