Skip to content
FAQ Request Quote Request Service Contact
22ft JMS Elite control panel to Tier 4 engine wiring harness with multi‑pin connector, corrugated protective tubing, and OEM jetter electrical harness for JMS Elite and JMS Elite Plus systems.

JMS Elite Control Panel to Tier 4 Engine - 22ft Wiring Harness

Service Part
J-022-101-JMSE
$1,221.18 - $1,221.18
$1,221.18
$1,221.18 - $1,221.18
$1,221.18

The 22ft harness is the main jetter harness that connects from the back of the JMS Elite control panel to the tier 4 engine. This particular harness works only with Tier 4 engines that have the JMSE Elite and JMS Elite Plus control panel (blue or red handheld remote). 

FAQ

Can I change the gun mode on my sewer jetter to operate at 4000PSI?

Yes, call your USJ rep and they can walk you through the steps to adjust this setting.

Do I need an unloader valve?

No, because this gun has the dumping feature, it does not require an unloader valve.

Water is coming out of the end of my dump gun even when I pressure down. Is that ok?

Yes, the dumping feature means that when you release the trigger of the gun, instead of dead heading the water pump, the water is relieved at low pressure out of the end of the top barrel on the gun. This protects the pump against over pressurization.

Why does my engine bog down when I use this dump gun?

If your engine is bogging down, you likely need to open your bypass valve to divert some water back to the tank since the gun is only rated for 8GPM.

FAQ

What control panels does this J-022-101-JMSE harness work with?

This harness only works with tier 4 engines and the JMS Elite control panel (blue or red handheld remote)

Copyright © 2026 US Jetting.

Powered by Shopify

AMEX
VISA
MASTERCARD